Description
ECET 220 Week 6 Complete DeVry
ECET 220 Week 6 Op Amp Applications DeVry
ECET 220 Week 6 Lab
Lab 6 of 7: Operational Amplifier Circuits and Applications (30 points)
Scenario/Summary
This week’s lab will demonstrate the operations of an inverting summing amplifier, a noninverting summing amplifier, and an instrumental amplifier.
Deliverables
This lab’s deliverables include the laboratory’s worksheet with its Cover Sheet (completed in the typed format shown within the worksheet), Observations/Measurements, and Questions sections.
The entire lab is worth 30 points. See worksheet and instruction documents for grading information.
Required Software
Multisim Software
Access the software at https://lab.devry.edu (Links to an external site.)Links to an external site..
Steps: 1, 2, and 3
Lab Steps
STEP 1: Download the Lab
Download the W6 Lab Instructions and Worksheet and save them to your PC.
Note: These items are found in the Files section.
STEP 2: Lab Cover Sheet
Report cover sheets must be completed for all labs. The key parts of these sheets include the following.
- Objective: A one or two sentence explanation of the purpose of the lab.
- Results: A statement of the final output, such as if the circuit and software worked properly.
- Conclusions: Conclusions based on the results—usually directly related to the purpose of the lab.
- Observations/Measurements: All results from the lab must be recorded on the cover sheets. Turn in the cover sheets for grading and retain the remainder of the lab as worksheets.
STEP 3: Carry Out Instructions for Theoretical Analysis in Part III: Procedure
Follow the instructions in Part A: Theoretical Analysis, and record all required measurements.
In this part, you will be predicting the characteristics of a parallel circuit using the various laws that we have discussed for the analysis. Make sure you go over the exercise problems embedded in the lecture to get a better understanding. Use proper units along with engineering notation to represent the electrical quantities.
See Part A: Theoretical Analysis in the lab’s instructions document.
STEP 4: Complete MultiSim Simulation Results in Part III: Procedure
Using MultiSim, perform the steps identified recording the required measurements.
In this part, you will be using technology to verify your predictions. You will be using MultiSim to simulate the given circuit. Record the required parameters as indicated by the meters and calculate the other quantities based on these measurements. Make sure to copy and paste the circuit from here into the Word document and let the page adjust to auto fit.
See Part B: MultiSim Simulation Results in the lab’s instructions document.
STEP 5: Complete Experimental Breadboard Results in Part III: Procedure
Construct the circuit. Perform the steps identified by recording the required measurements.
See Part C: Experimental Breadboard Results in the lab’s instructions document.
STEP 6: Complete Results Analysis in Part III: Procedure
Record the data collected from this experiment and determine the error percentages.
See Part D: Results Analysis in the lab’s instructions document.
STEP 7: Transfer Recorded Values to Observations/Measurements
Copy the recorded results for Questions A, B, C, and D in Part III: Observations/Measurements section of the lab. This is the page immediately following the Cover Sheet in the worksheet.
STEP 8: Answer Questions Section
Make sure to completely answer all of the questions in this lab’s worksheet.
STEP 9: Verify Completion of the Cover Sheet
Type all required information onto the Cover Sheet section in the worksheet.
See Step 2: Complete the Lab Cover Sheet in the Lab Steps shown above on this page for specific information.
STEP 10: Submit Your Deliverables
Submit only the worksheet with its Cover Sheet, Observations/Measurements, and Questions sections.
ECET 220 Week 6 CHAPTER PROBLEMS
Chapter 8 Problems: 2, 3, 6, 9, 12, 13, 15, and 16
Chapter 12 Problems: 1 and 2
Refer to the textbook to answer the problems found at the end of each chapter.
Remember to submit your assignment for grading.
ECET 220 Week 6 COURSE PROJECT
You and your team members should focus on future perspectives of the topical area of your project in this week’s document.
Please review the Course Project Overview in Introduction and Resources.
Be sure to submit your assignment.
ECET 220 Week 6 QUIZ
Instructions
Here is some information about your Quiz.
- Take the quiz after completing the Weeks 5 and 6 Assignments (including readings, lectures, and chapter problems).
- There are six essay questions requiring calculations for operational amplifier circuits covering COs 5 and 6.
- The entire quiz is worth 50 points and makes up 5% of the final grade. There are five problems worth 8 points each and one problem worth 10 points each.
- You have 90 minutes to complete the quiz.
- Save frequently because when the time limit is reached, you will automatically be exited from the exam.
By submitting this work, I am attesting that it abides by the Student Honor Code.
Course Tutor helps in providing the best essay writing service. If you need 100% original papers for ECET 220 Week 6 Complete DeVry, then contact us through call or live chat.
ECET 220 Week 6 Complete DeVry
ACCT 553 DeVry, BIAM 500 DeVry, CIS 500 STR, CIS 558 STR, ENG 105 GCU, FIN 390 DeVry, FIN 504 GCU, HCA 545 GCU, HCA 699 GCU, HLT 306 GCU, HLT 362 GCU, HLT 555 GCU, HLT 610 GCU, HLT 665 GCU, HOSP 594 DeVry, HRM 600 DeVry, MAT 144 GCU, MGMT 600, MGT 599 STR, MGT 655 GCU, MKT 373 GCU, PSY 362 GCU, PSY 565 GCU, PSY 575 GCU, PSY 665 GCU, SOC 102 GCU, SOC 320 GCU, SOC 372 GCU, SOC 412 GCU, NSG 6440 SU, HIM 515 GCU, NSG 4029 SU, HIM 615 GCU, NSG 3029 SU, NSG 4055 SU, NSG 6630 SU, NSG 6005 SU, CRMJ 310, PSY 510 GCU, CRMJ 300 Devry, CRMJ 425, SPD 200 GCU, HLT 490 GCU ,ECH 340 GCU , ECH 440 GCU , ECH 355 GCU ,ECH 350 GCU ,LDR 461 GCU ,ECH 425 GCU ,REL 212 STR ,SCI 115 STR ,CIS 505 STR ,JUS 652 GCU, MGT 640 GCU, CIS 527 STR, SOC 436 GCU,ACC 502 GCU, FIN 504 GCU , MATH 260 DeVry ,ETHC 445 DeVry ,ECET 220 DeVry
Reviews
There are no reviews yet.